Acrylic letters are custom-cut letters made from acrylic sheet (plexiglass). They’re widely used for storefront signage, reception/logo walls, wayfinding signs, exhibitions, and branded displays because they look clean and modern and are lightweight.

Yes. Excelite Plastics can fabricate custom acrylic letters based on your AI/PDF/DXF/SVG vector file or a dimensioned drawing. If you only have a JPG/PNG, you can send it—our team will confirm whether it can be converted for production.

Best formats:

• AI / PDF (vector) / DXF / SVG Also helpful:
• Quantity
• Thickness, color/finish
• Mounting method (tape / studs / standoffs)
• Shipping destination

Common thicknesses for acrylic letters include 3mm, 5mm, 8mm, 10mm, 12mm, 15mm, 20mm (and custom upon request). We’ll recommend thickness based on your letter height, indoor/outdoor use, and mounting style.

Typical options include:

• Clear, white, black, colored acrylic
• Gloss or matte/frosted (depending on sheet type) If you need a specific look (e.g., “luxury glossy black” or “frosted white”), send a reference photo and we’ll match the closest material/finish.

We can supply letters with different edge finishes depending on your appearance requirement:

• Standard smooth cut edge (cost-effective)
• Polished edge option for premium appearance (recommended for clear letters and lobby logos)

Yes—if you need branding details, we can support silkscreen printing (and other marking options depending on design). Share your artwork and quantity so we can recommend the best method.

Yes, we can apply high-bond adhesive tape on the back for fast installation on smooth, clean surfaces (commonly used for indoor signs). Tell us your wall material and whether it’s indoor/outdoor.

Often yes, but it depends on:

• Letter height
• Stroke width (thin lines)
• Thickness
• Installation method
  Send your design and target size; we’ll confirm manufacturability and suggest adjustments if needed.

Acrylic letters can be used outdoors.

Lead time varies by:

• Quantity
• Thickness/finish (polishing/printing adds time)
• Packaging requirements
  As a baseline, Excelite emphasizes quick turnaround—share your deadline and we’ll confirm a realistic production + shipping schedule.

Use:

• Mild soap + water
• Soft microfiber cloth
  Avoid:
• Abrasive pads
• Strong solvents (can haze or crack acrylic)

You can see our detail introduction: https://exceliteplas.com/acrylic-vs-polycarbonate-a-comprehensive-comparison/